臭氧二氧化硫老化試驗機
★ 使用方便：
● 簡易觸摸屏操作及控制
● 更換燈管簡便
● *校準技術
● 所有重要參數顯示于同一頁面
● 電源中斷后自動重啟功能
● 預先編制程序存儲，實現零錯誤操作
★ 經濟性：
● 低成本、經濟型的高水準老化設備
● 高性價比的熒光燈使用壽命
● 即插即用，低維護要求
★ 其他性能：
● 良好和穩定的輻照度和溫度分布
● 輻照度>1.35 UVA 和 >1.15 UVB
● *的技術和工藝，進一步提高了光學和溫度傳感器的精度
● 氣體加熱器的保護設計有效防止濺水，避免燒毀
● 機架一體的水位保護開關和觀察窗有效保護意外損傷
● 疊加式機架使有限的占地面積內提高了測試容量
● 疊加的機器可選配噴淋裝置
應用行業
● 塑料
● 油漆、涂層與顏料
● 地表覆膜
● 光電產品
● 木材涂層
● 粘合劑
● 汽車外漆
● 織物
適用標準 | 通用 |
| - ISO 4892-1 Plastics- Methods of exposure to laboratory light sources-Part 1: General Guidance
- ASTM G-151, Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
- ASTM G-154, Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Non-Metallic Materials
- British Standard BS 2782: Part 5, Method 540B (Methods of Exposure to Lab Light Sources)
- SAE J2020, Accelerated Exp. of Automotive Exterior Materials Using a Fluorescent UV/Condensation Apparatus
- JIS D 0205, Test Method of Weatherability for Automotive Parts (Japan)
- GB/T 16422.1，塑料實驗室光源暴露試驗方法 第1部分：總則
|
|
| 涂料 |
| - ISO 11507, Paints & varnishes-Exposure of coatings to artificial weathering-Exposure to fluorescent UV and water
- ISO 20340, Paints & varnishes –Performance requirements for protective paint systems for offshore and
related structures - ASTM D-3794, Standard Guide for Testing Coil Coatings
- ASTM D-4587, Standard Practice for Light/Water Exposure of Paint
- US Government, FED-STD-141B
- US Govt., Federal Specification TT-E-489H, Enamel, Alkyd, Gloss, Low VOC Content
- US Govt., Federal Specification TT-E-527D, Enamel, Alkyd, Lusterless, Low VOC Content
- US Govt., Federal Specification TT-E-529G, Enamel, Alkyd, Semigloss, Low VOC Content
- US Govt., Federal Specification TT-P-19D Paint, Latex, Acrylic Emulsion, Ext. Wood & Masonry
- NACE Standard TM-01-84 Procedures for Screening Atmospheric Surfaced coatings
- GM4367M Topcoat Materials - Exterior
- GM 9125P Laboratory Accelerated Exposure of Automotive Material
- Korean Standard M5982-1990, Test Method for Accelerated Weathering
- Spanish Std, UNE 104-281-88 Accelerated Testing of Paints and Adhesives with Fluorescent UV Lamps
- Israeli Standard No. 330, Steel Windows
- Israeli Standard No. 385, Plastic Windows
- Israeli Standard No. 935, Road Marking Paint
- Israeli Standard No. 1086, Aluminum Windows
- NISSAN M0007, Fluorescent UV/Condensation Test
- JIS K 5600-7-8, Testing Methods for Paints
- MS 133: Part F16, Methods of Test for Paints and Varnishes: Part F16: Exposure of Coatings to Artificial Weathering- Exposure to Fluorescent UV and Water (ISO 11507)
- NBR-15.380 Paints for buildings–Methods for performance evaluation of paints for non-industrial buildings – Resistance to UV irradiation/water vapor condensation, by accelerated test
- prEN 927-6 Paints & varnishes–Coating materials and coating systems for exterior wood – Pt. 6: Exposure of wood coatings to artificial weathering using fluorescent UV and water
- GB/T 12967.4，鋁及鋁合金陽極氧化 著色陽極 氧化膜耐紫外光性能的測定
|
|
| 紡織品 |
| - AATCC Test Method 186, Weather Resistance: UV Light and Moisture Exposure
- ACFFA Test Method for Colorfastness of Vinyl Coated Polyester Fabrics
|
|
| 印刷油墨 |
| - ASTM F1945, Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting
|
|
|
| • GB/T 16585，硫化橡膠人工氣候老化（熒光紫外燈）試驗方法 |
|
|
| • GB/T 19394，光伏（PV）組件紫外試驗 |
| type the link here
|
| 粘合劑和密封劑 |
| - ASTM C 1501, Standard Test Method For Color Stability of Building Construction Sealants as Determined byLaboratory Accelerated Weathering Procedures
- ASTM C-1184, Specification for Structural Silicone Sealants
- ASTM C-1442, Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
- ASTM D-904, Standard Practice for Exposure of Adhesive Specimens to Artificial Light
- ASTM D-5215, Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
- American Plywood Assn., Approval Procedures for Synthetic Patching Materials, Section 6
- Spanish Std, UNE 104-281-88 Accelerated Testing of Paints and Adhesives with Fluorescent UV Lamps
|
|
| 塑料 |
| - ISO 4892 Plastics - Methods of Exposure to Laboratory Light Sources-Part 3: Fluorescent UV Lamps
- DIN 53 384, Testing of plastics, Artificial Weathering and Exposure to Artificial Light
- Spanish Standard UNE 53.104 (Stability of Plastics Materials Exposed to Simulated Sunlight)
- Israeli Standard No. 385, Plastic Windows
- JIS K 7350, Plastics - Methods of Exposure to Laboratory Light Sources-Part 3: Fluorescent UV Lamps
- ASTM D-1248, Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
- ASTM D-4329, Standard Practice for Light/Water Exposure of Plastics
- ASTM D-4674, Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor
Fluorescent Lighting and Window-Filtered Daylight - ASTM D-5208, Standard Practice for Exposure of Photodegradable Plastics
- ASTM D-6662, Standard Specification for Plastic Lumber Decking Boards
- ANSI C57.12.28 Specification for Accelerated Weathering of Padmounted Equipment Enclosure Integrity
- ANSI, A14.5 Specification for Accelerated Weathering of Portable Reinforced Plastic Ladders
- Edison Electrical Inst. Specification for Accelerated Weathering of Padmounted Equip. Enclosure Integrity
- Wisconsin Electric Power Specification for Polyethylene Signs
- GB/T 18950，橡膠和塑料軟管 靜態下耐紫外線性能測定
- GB/T 16422.3，塑料實驗室光源暴露試驗方法 第3部分：熒光紫外燈
|
|
| 屋頂材料 |
| - ASTM D-4799, Test Method for Accelerated Weathering of Bituminous Roofing Materials
- ASTM D-4811, Standard Specification for Nonvulcanized Rubber Sheet Used as Roof Flashing
- ASTM D-3105, List of Test Methods for Elastomeric and Plastomeric Roofing & Waterproofing
- ASTM D-4434, Standard Specification for PVC Sheet Roofing
- ASTM D-5019, Standard Specification for Reinforced Non-Vulcanized Polymeric Sheet Used in Roofing Membrane
- ANSI/RMA IPR-1-1990 Req. for Non-Reinforced Black EPDM Sheet for Roofing Membrane
- ANSI/RMA IPR-2-1990 Req. for Fabric-Reinforced Black EPDM Sheet for Roofing Membrane
- ANSI/RMA IPR-5-1990 Req. for Non-Reinforced Non-Black EPDM Sheet for Roofing Membrane
- ANSI/RMA IPR-6-1990 Req. for Fabric-Reinforced Non-Black EPDM Sheet for Roofing Membrane
- British Standard BS 903: Part A54 Annex A & D, Methods of Testing Vulcanized Rubber
- CGSB-37.54-M, Canadian General Standards Board Spec. for PVC Roofing & Waterproofing Membrane
- DIN EN 534, Corrugated bitumen sheets
- EOTA TR 010, Exposure procedure for artificial weathering
- RMA Specification for Reinforced Non-Vulcanized Chlorosulfonated Polyethylene Sheet for Roofing Membrane
|
|
| 復合材料 |
| - Israeli Standard No. 385, Anodic Coatings on Aluminum
|
產品規格
| 貨號 | 型號 | 名稱 | 規格 | 價格 | 備注 | 購買 |
| | | | 登陸查看 | 來電詢價 |  |
