適用于寬頻帶、高精度的電流測量
● 超高精度，±0.06% 振幅精度，±0.2 度相位精度
● 寬頻帶 DC ~ 1 MHz (CT6862) ，良好的頻率特性
● 應用于電動和混合動力車領域
● 寬廣的操作溫度量程，適合用于汽車方面的測量
● 應用于太陽能發電，電池充放電測量和逆變器次級電路測量
● 使用存儲記錄儀觀測波形
基本參數
| CT6862 | CT6863 | |
|---|---|---|
| 額定電流 | 50 A AC/DC | 200 A AC/DC |
| 允許輸入 | 100 A 連續 (需要降低頻率或溫度) | 400 A 連續 (需要降低頻率或溫度) |
| 頻率特性 | 振幅: DC ~ 1 MHz 相位: DC ~ 300 kHz | 振幅: DC ~ 500 kHz 相位: DC ~ 300 kHz |
| 振幅和相位精度 | DC ±0.05 % rdg. ±0.01 % f.s. (相位: 無限制) 16 Hz ≤ f ≤ 400 Hz ±0.05 % rdg. ±0.01 % f.s. (相位: ±0.2 deg) 規定至1 MHz | DC ±0.05 % rdg. ±0.01 % f.s. (相位: 無限制) 16 Hz ≤ f ≤ 400 Hz ±0.05 % rdg. ±0.01 % f.s. (相位: ±0.2 deg) 規定至500 kHz |
| 功率消耗 | 5 VA max. (電源供應為50 A/55 Hz, ±12 V ) | 6 VA max. (電源供應為 50 A/55 Hz, ±12 V ) |
| 輸出電壓率 | 2 V/額定電流量程 (電壓輸出使用傳感器單元9555-10，使用帶 1 Mohm 以上輸出電阻的設備) | |
| 對地額定電壓 | AC/DC 1000 V (50/60 Hz, CAT III ) | AC/DC 1000 V (50/60 Hz, CAT III ) |
| 鉗口直徑 | φ 24 mm (0.94 in) | φ 24 mm (0.94 in) |
| 操作溫濕度 | -30°C ~ +85°C (86°F ~ 185°F), 80% rh 或以下 (不凝結) | |
| 電源供應 | DC ±11 V ~ ±15 V (電源供應使用 9555-10， 9555-10要求 100 ~ 240 V AC) | |
| 體積及重量 | 70W× 100H× 53D mm，線長: 3 m， 340 g | 70W × 100H× 53Dmm,，線長: 3 m ，350 g |
| 附件 | 標識帶× 6，操作手冊× 1 | |
注：連接示波器或存儲記錄儀為鉗式傳感器供電。
9555-10 基本參數 (電源供應)
| 適用機型 | 9270, 9271, 9272, 9272-10, 9277, 9278, 9279, 9709, CT6862, CT6863, 一個單元 |
|---|---|
| 輸出 | BNC 接口，傳感器的輸出信號 |
| 功率消耗 | AC 轉換器9418-15, AC 100 ~ 240V, 50/60Hz, 20VA Max. |
| 體積及重量 | 42mm W × 82mm H × 132mmD, 600g |
| 附件 | AC 轉換器9418-15 × 1 |
Basic parameters
CT6862 CT6863
Rated current 50 A AC/DC 200 A AC/DC
Maximum allowable input 100 A continuous (requires reduced frequency or temperature) 400 A continuous (requires reduced frequency or temperature)
Frequency characteristics Amplitude: DC ~ 1 MHz
Phase: DC ~ 300 kHz Amplitude: DC ~ 500 kHz
Phase: DC ~ 300 kHz
Amplitude and phase accuracy DC ±0.05 % rdg. ±0.01 % f.s. (Phase: unlimited)
16 Hz ≤ f ≤ 400 Hz ±0.05 % rdg. ±0.01 % f.s. (Phase: ±0.2 deg)
Specified to 1 MHz DC ±0.05 % rdg. ±0.01 % f.s. (Phase: Unlimited)
16 Hz ≤ f ≤ 400 Hz ±0.05 % rdg. ±0.01 % f.s. (Phase: ±0.2 deg)
Specified to 500 kHz
Power consumption 5 VA max. (Power supply is 50 A/55 Hz, ±12 V) 6 VA max. (Power supply is 50 A/55 Hz, ±12 V)
Output voltage rate 2 V / rated current range (voltage output uses sensor unit 9555-10, using devices with output resistance of 1 Mohm or more)
Maximum rated voltage to ground AC/DC 1000 V (50/60 Hz, CAT III ) AC/DC 1000 V (50/60 Hz, CAT III )
Jaw diameter φ 24 mm (0.94 in) φ 24 mm (0.94 in)
Operating temperature and humidity -30 ° C ~ +85 ° C (86 ° F ~ 185 ° F), 80% rh or below (non-condensing)
Power supply DC ±11 V ~ ±15 V (power supply use 9555-10, 9555-10 requires 100 ~ 240 V AC)
Volume and weight 70W × 100H × 53D mm, line length: 3 m, 340 g 70W × 100H × 53Dmm, line length: 3 m , 350 g
Accessories Identification tape × 6, operation manual × 1
Note: Connect the oscilloscope or memory logger to power the caliper sensor.
9555-10 Basic parameters (power supply)
Applicable models 9270, 9271, 9272, 9272-10, 9277, 9278, 9279, 9709, CT6862, CT6863, one unit
Output BNC interface, sensor output signal
Power consumption AC converter 9418-15, AC 100 ~ 240V, 50/60Hz, 20VA Max.
Volume and weight 42mm W × 82mm H × 132mmD, 600g
Accessories AC Converter 9418-15 × 1
