產品概述
ODMC-5CSB脈沖噴吹控制儀是脈沖袋式除塵器噴吹清灰系統的主要控制裝置。它的輸出驅動電磁脈沖閥，進而控制壓縮空氣對濾袋循序噴吹清灰，使除塵器的運行阻力保持在設定的范圍內，以保證除塵器的處理能力和收塵效率。除塵器分為多個倉室，各個倉室逐個單獨清灰，需要清灰的倉室停止過濾，脈沖控制儀輸出電信號關閉該倉室的氣缸提升閥.該倉室內電磁脈沖閥逐個噴吹清灰。
The pulsejet control device is the main control device of the pulse bag type dust collector. Its output electromagnetic drive pulse valve, so as to control the compressed air to bag sequential injection blowing, the running resistance of the dust remover to remain within the limits set, to ensure that the dust collector of the processing power and dust collection efficiency.Dust separator is divided into several storage compartments each compartment is individually clear ash, need to be clear of the warehouse to stop filtering, pulse control instrument output signal to close the chamber of the cylinder valve, the valve of the warehouse indoor electromagnetic pulse valve one by one.
壓差清灰控制方式：以壓差運行區間為主要控制方法:
定時清灰控制方式：以循環間隔延時為主要控制方法:
室間隔：一個單元(離線閥與脈沖閥)動作完成后到下一單元工作時間間隔;
脈沖等待：離線閥關閉或開啟N秒后脈沖閥動作;(適用于離線氣箱)
循環間隔：兩個脈沖周期之間停頓的時間;
脈沖周期：控制儀完成所有電磁脈沖閥驅動輸出所需要的時間;
脈沖間隔：相鄰二個電磁脈沖閥輸出驅動電壓之間的間隔時間:
脈沖寬度：一個驅動電壓所持續時間:
Differential pressure cleaning method: the main control method in the operating section of differential pressure;
Time cleaning control method: the main control method of the time delay of the cycle;
Room interval: a unit loff valve and valve) is performed to the next unit working time interval;
Pulse waiting: offline valve to close or open the N second after the pulse valve action; (applicable to off-line gas box)
Cycle interval: the time between the two pulse cycles;
Pulse period: the time required to complete all the electromagnetic pulse valve drive output;
Pulse interval: the interval between two adjacent electromagnetic pulse valve output driving voltage;
Pulse width: the duration of a driving voltage;
型號含義
注:1.訂貨代碼:例如，ODMC-5CSB-0403;即表示除塵器有4個倉室，每個倉室內有3個脈沖閥。2.本型號控制儀可實現在線清灰、離線清灰、壓差清灰。3. ODMC-5SCBE-XX為擴展單元控制儀:本主機單元采用液晶屏顯示，可控制10個擴展子單元。
型號規格
| 主機型號規格 Model and Specifications | 輸出位數 Output bits | 調節范圍 Range of regulation |
| ODMC-5CSBE-2X | 2 | 1-2 |
| ODMC-5CSBE-4X | 4 | 1-4 |
| ODMC-5CSBE-6X | 6 | 1-6 |
| ODMC-5CSBE-8X | 8 | 1-8 |
| ODMC-5CSBE-10X | 10 | 1-10 |
| 擴展單元型號 Model and Specifications | 輸出位數 Output bits | 調節范圍 Range of regulation |
| ODMC-5CSB-10X | 10 | 1-10 |
| ODMC-5CSB-20X | 20 | 1-20 |
| ODMC-5CSB-36X | 36 | 1-36 |
| ODMC-5CSB-72X | 72 | 1-72 |
| ODMC-5CSB-144X | 144 | 1-144 |
*輸出總位數=離線(提升)閥數+電磁脈沖閥數=1#擴展單元+2#擴展單元+3#擴展單元+……
*如果離線閥數+電磁脈沖閥數小于36個可直接選用擴展單元.無需購買主機
技術指標
| 額定輸入電壓 Input voltage | 220VAC(1±10%)50HZ-60HZ |
| 額定輸出電壓 Output voltage | 24VDC(或其它規格)(or another specification) |
| 額定輸出電流 Rated output current | 1.5A |
| 控制提升閥與脈沖閥個數 Control of lifting valve and the number of pulse valve | 360（提升閥+電磁脈沖閥） |
| 脈沖等待 Pulse waiting | 10秒（即提升閥關閉或開啟10后脈沖閥工作） |
| 輸出脈沖寬度調節范圍 Pulse width | 0.01-0.99秒（可調） |
| 輸出脈沖間隔調節范圍 Pulse intenal | 3~999秒（可調） |
| 脈沖周期（循環間隔） Pulse cycle(circulation interval) | 10~9990秒（可調） |
| 沉降時間調節范圍 Settling time regulation range | 1~99秒（可調） |
| 室間隔時間調節范圍 Room time interval adjustment range | 1~999秒（可調） |
| 使用環境 Working environment | -25℃~55℃ 空氣的相對濕度不超過85%;無嚴重的腐蝕氣體和導電塵埃; 無劇烈震動或沖擊 |
| 外形尺寸 （主控單元、擴展單元） Size | 250×190×96mm |
安裝方式
