靜液壓爆破試驗機適用于各種流體輸送用塑料管材進行管材液壓瞬時爆破和長期恒定耐壓下熱塑性管材耐破壞時間的測定。它是各科研院所、質檢部門及管材生產廠家的檢測儀器。
靜液壓試驗機采用嵌入式PC機(以下簡稱PC機)集群控制。每一路為一個模塊,
每個模塊設有一個微電腦,用來接收嵌入式PC機控制指令,實現控制,同時通過串行總線不斷的把控制信息反饋給PC機,由PC機完成試驗數據的采集和存儲功能。其具有管材破裂識別、實時監控、來電數據恢復、打印、存儲試驗結果、試樣預處理設置等功能。
符合標準
標準號 | 標準名稱 |
GB/T6111-2018 | 液體輸送用熱塑性塑料管材耐內壓試驗方法 |
GB/T15560-95 | 流體輸送用塑料管材液壓瞬時爆破和耐壓試驗方法 |
IS01167-2006 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids --Determination of the resistance to internal pressure -- Part 1: General method |
IS01167-2006 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids --Determination of the resistance to internal pressure -- Part 1: General method |
ASTM D1598-2004 | Pipe, Plastic, Under Constant Internal Pressure, Time-to-Failure of (No S/S Document) |
ASTM D1599 | Standard Test Method forResistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings1 |