尋址編程實例
s_zro:
r_zro:
b_zro:
t_zro:
k_zro:
j_zro:
n_zro:
e_zro:
db 0f0h,005h,000h
s_full:
r_full:
b_full:
t_full:
k_full:
j_full:
n_full:
e_full:
db 01h,076h,080h
s_high:
r_high:
b_high:
t_high:
k_high:
j_high:
n_high:
e_high:
db 01h,086h,093h
s_data:
r_data:
b_data:
t_data:
k_data:
j_data:
n_data:
e_data:
;-50
db  0F0H,002H,036H;, 0F0H,002H,036H, 0F0H,002H,036H, 0F0H,002H,036H,0F0H,002H,036H,0F0H,002H,036H  ,0F0H,002H,036H ,0F0H,002H,036H ,0F0H,002H,036H ,0F0H,002H,036H
;-40
db  0F0H,002H,032H ,0F0H,002H,028H, 0F0H,002H,024H ,0F0H,002H,019H,0F0H,020H,015H ,0F0H,002H,011H ,0F0H,002H,007H ,0F0H,002H,003H ,0F0H,001H,099H ,0F0H,001H,094H
;-30

如果需要增加K擋的數據
先將上面的
k_zro:
k_full:
k_high:
k_data:
這幾句前加;號
然后新建K擋的數據
k_zro:
DB  0F0H,27H,00H   ;可測量的zui低溫度-270.0度

k_full:
DB  01H,34H,090H ; 可測量的zui高溫度1349.0度

k_high:
DB  05H,41H,04H  ;zui高溫度1349.0度對應的輸出值54.104 MV  如果是電阻就是電阻值
k_data:
DB 0F0H,64H,58H,0F0H,64H,57H,0F0H,64H,56H         ;表格嚴格按從小到大排序,負溫度應該是-270,-269,-268的順序,你發的表格負溫度
順序是不對的要修改.

其他的改法和上面的方法一樣.