德國進口取樣管線（高溫型）-----溫度(180-200°C) 品牌：德國PSG

公司歷史，產品使用壽命5-10年之久，管線廠家與國外各大系統集成商配套使用。

Rigid lines

· Lengths up to 300 m

· (Depending on the power supply and power rating of the heating cable, up to 165 m with one heating circuit. With multiple supplies for additional heating circuits, the maximum tube bundle length can be extended.

· Rigid lines

· For inside and outside installation

HeatThermal fleece (temperature-resistant up to 200°C)

· Fibreglass fleece (temperature-resistant up to 500°C)

Material

· Kunststoffschutzgeflecht aus Polyamid öl-, benzin-, säure- und lösungsmittelbeständig, halogenfrei, selbstverlöschend und flammwidrig, Dauerbetriebstemperatur = -55°C bis +125°C

· Metallschutzgeflecht aus verzinktem Stahldraht, Dauerbetriebstemperatur = +300°C

Wärmedämmung

· Silikonschaumschlauch temperaturbeständig bis 200°C

Einsatz

· Kurze Längen

· Sehr enge Montageverhältnisse (kleine Biegeradien)

· Feste Verlegung oder Entnahmestellen (Labor/Prüfstand)

· Ohne mechanische Beanspruchung

· Innenmontage

德國混合分配氣（用于取樣系統） 品牌：德國PSG

More than 1000 types and configurations are produced by PSG.

德國取樣探頭 品牌：德國PSG

More than 25 years of experience and now all new: the PSG Basic Probe for CEMS.

PSG Probes for continuous emission monitoring

Sampling probes for continuous sampling of gasesThe process gas is tapped using a probe tube and a heated filter unit. These gases need further treatment, since, in most cases, they have an excessively high dust content.The newly developed PSG filter unit is smaller, saves energy and is installation-friendlier.Heating of PTC-Element T=190°C. Ceramic filter with a filter fineness of 0.3 µm. Test gas connection ¼” RT inner thread. Measurement gas connection ¼” RT inner thread.

Optionally, the new PSG filter unit can be supplied with a filter and probe tube back-flushing. The filter unit can be incorporated in a strong stainless steel housing of protection class IP54.The connections of the sampling tube are located right on the housing. The voltage supply and temperature sensor are connected via a terminal box.